Checking Material StrengthSnap Fasteners & Decorative Buttons XIRIUS Flat Back Snap Fastener Jeans ButtonsRivetsRose Pins & Rhombus PinsCrystal Studs


XIRIUS Flat Back Snap Fastener

XIRIUS Flat Back Snap Fasteners can be easily applied using a fly press. The application is divided into two steps as the product consists of two parts (decorative part and closure). It is important to carefully check and to consider the thickness of the fabric before beginning the application process.

Art.SizeMaterial Thickness*
1783/300SS 201 – 3 mm

* Could vary due to character and production of carrier materials.

The material should not contract or crinkle after the application. To avoid this happening, tests are highly recommended on some fabric samples before starting the final application process. In order to prevent possible injury, the wearing of protective eyewear is recommended when mechanically applying crystal products.


Stage 1: Application of the decorative (upper) part

Stage 2: Application of the closure (lower) part