|Machines||Snap Fasteners & Decorative Buttons||XIRIUS Flat Back Snap Fasteners||Jeans Buttons||Rivets||Rivet Flat Shaft||Rose Pins||Rhombus Pins||Crystal Studs|
Tools for Rivets
Rivets can be applied to various materials with or without Back Parts. The correct die combination must be chosen accordingly. Please ensure that the recommended fabric strengths, listed in the Application subsection, are followed.
A vacuum pump and adapter allow Rivets to be easily picked up and applied. Upper dies are thus available with different thread strengths. When using the Swarovski vacuum adapter, dies with a M8 thread are required.
Alternatively, dies with M6 threads are available for presses from other manufacturers, or when not using a vacuum adapter.
* The spare part (plastic insert) is incorporated into the upper die as standard. It should be changed when it becomes worn.