Machines & Tools


The following machines, tools and aids can be used for the mechanical application of Swarovski products. 

Swarovski offers a variety of different tools for the fly press, depending on the product employed.

Fly press


Fly press including possible dies and aids for application (in this case, of Rivets). 


Rose Pins 

A vacuum pump allows Rose Pins to be easily picked up and applied. The vacuum connection is integrated directly into the upper die. An additional vacuum adapter is not necessary. 

Rose Pins

* The spare part is integrated into the upper die as standard. This should be changed when it becomes worn.

Chessboard Pins & Rhombus Pins

Chessboard Pins and Rhombus Pins can be easily applied to various materials by using a fly press. A vacuum pump and a vacuum adapter (art. 9040/105) enable an easy intake and application of the Pins.   NEW

Chessboard Pins & Rhombus Pins

* The spare part is integrated into the upper die as standard. This should be changed when it becomes worn.

Rivets 

Rivets can be applied to various materials with or without Back Parts. The correct die combination must be chosen accordingly. Please ensure that the recommended fabric strengths are followed. 

A vacuum pump and adapter allow Rivets and Crystal Pearl Rivets to be easily picked up and applied. Upper dies are thus available with different thread strengths. When using the Swarovski vacuum adapter, dies with an M8 thread are required. Alternatively, dies with M6 threads are available for presses from other manufacturers, or when not using a vacuum adapter.

 

XIRIUS Flat Back Snap Fastener

The XIRIUS Flat Back Snap Fastener is applied using a fly press. The product consists of two parts: the decorative (upper) part and the closure (lower) part. For the application with a fly press, both parts need a specific upper and a lower die.

A vacuum pump (art. 9040/022) and a vacuum adapter (art. 9040/105) enable an easy fixation of the products in the upper die during application.

Vacuum adapter (art. 9040/105)
with external screw instead of inner thread to fix the upper die (art. 9060/032 and art. 9060/ 034).

Square Rivets and Star Rivets

1 The spare part is integrated into the upper die as standard. This should be changed when it becomes worn.
2 This tool should be changed when it becomes worn. No separate spare part for upper die.

Crystal Stud

For the application of Crystal Studs following dies are necessary:  

Crystal Stud


A vacuum pump enables an easy intake and application of the Crystal Stud. As the vacuum adapter is already integrated to the upper die, an additional adapter is not necessary.

Jeans Buttons   NEW

Jeans Buttons

1 When using die Art. 9060/009, please employ the specially developed thread adapter Art. 9060/014.
2 The appropriate thread adapter is supplied with the fly press.


Decorative Buttons, Snap Fasteners, and Magnet Fasteners

Decorative Buttons, Snap Fasteners, and Magnet Fasteners


Inset Snap Fastener (Art. 1782/190)   NEW

Inset Snap Fastener (Art. 1782/190)


All tools can also be ordered as set: Art. 9060/021.