|Checking Material Strength||Snap Fasteners & Decorative Buttons||Inset Snap Fastener||XIRIUS Flat Back Snap Fastener||Jeans Buttons||Rivets||Rose Pins, Chessboard Pins & Rhombus Pins||Crystal Studs|
Inset Snap Fastener
Inset Snap Fasteners can be easily applied by using a fly press or a pneumatic attaching machine.
Following components are needed for the Inset Snap Fastener
|Open metal cap|
Stage 1: Pre-Punching of the carrier material
It is necessary to pre-punch the carrier material before the application of the front and the back part of the Inset Snap Fastener. Material – fabric or multiple layers up to a thickness of 5.00 mm – may be pre-punched all together.
Stage 2: Application of the front part
Stage 3: Application of the back part
Please also have a look on the comprehensive video: Application of the Inset Snap Fastener by fly press.